Assembling; To Assemble The Hand Blender; Assembling The Wire Whisk; Assembling The Liquidiser - SilverCrest SSMS 600 C3 Mode D'emploi

Assembling

WARNING! RISK OF INJURY!
► Only insert the plug into the power socket after you have assembled the
appliance for use.
NOTICE
► Before the fi rst use, clean all parts as described in the chapter "Cleaning".

To assemble the hand blender

WARNING! RISK OF INJURY!
► The blade is extremely sharp! Handle it with great care.
Place the hand blender 5 on the motor unit 4 so that the arrow points to
■
the symbol
points to the symbol

Assembling the wire whisk

Insert the whisk 0 into the whisk holder 9.
■
Place the so assembled whisk 0 onto the motor block 4 so that the arrow
■
points to the symbol
symbol

Assembling the liquidiser

WARNING! RISK OF INJURY!
The blade 7 is extremely sharp! Handle it with great care.
►
Carefully place the blade 7 onto its retainer in the bowl 8.
■
Turn the blade 7 a little until it slides onto the holder.
NOTICE
The blade 7 is not fi xed fi rmly in the holder. This is normal. The blade 7
►
is only sits fi rmly when the bowl lid 6 is put on.
Fill the bowl with the foodstuff s you wish to liquidise 8.
■
■ 48 │
GB
. Turn the hand blender 5 until the arrow on the motor unit 4
.
Turn the motor block 4 until the arrow points at the
.
SSMS 600 C3