Use; Switching On And Off; Stapling/Nailing; Working With The Rip Fence - Parkside PET 25 C2 Traduction Des Instructions D'origine

Use

Switching on and off

♦ Set the ON/OFF switch
switch the appliance on .
♦ Set the ON/OFF switch
switch the appliance off .

Stapling/nailing

♦ Switch the appliance on by moving the ON/
OFF switch to the position "I" .
♦ Press the face plate
the location on the material that you want to
staple/nail .
♦ Press the trigger
NOTE
► The integrated safety switch on the face plate
prevents accidental triggering .

Working with the rip fence

If you want to tack with nails or staples at a con-
stant distance to an edge, proceed as follows:
♦ Pull out the rip fence
arrow .
♦ Move the rip fence
is at the required distance from the edge of the
object that you want to work on .
♦ Place the rip fence
object that you want to work on .
Proceed as described in the section Stapling/
♦
nailing .

Troubleshooting

CAUTION!
► Ensure that the appliance has been discon-
nected from the power in order to prevent
it from being accidentally switched on and
causing injuries .
Cause:
A staple or nail is blocking the appliance .
■ 16 │ GB │ IE
All manuals and user guides at all-guides.com
to the position "I" to
to the position "0" to
of the appliance onto
.
in the direction of the
along the scale
onto the edge of the
Solution:
♦ Open the magazine slider
the tension . Use the hex key (fig . D) to remove
the screws from the face plate
♦ Remove the staple or nail .

Maintenance and cleaning

WARNING! RISK OF INJURY
► Always remove the plug from the power
socket before working on the appliance .
The electric staple gun is maintenance free .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Always clean the appliance directly after finish-
ing work .
■ Never permit liquids to enter inside the appliance .
■ Use a cloth to clean the housing . Never use
petrol, solvents or cleansers which can damage
plastic .

Disposal

The packaging consists of environmentally
friendly material . It can be disposed of in
the local recycling containers .
until it
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that worn-
out power tools be collected separately and recycled
in an environmentally compatible manner .
Your local community or municipal authorities can pro-
vide information on how to dispose of the appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
. This will remove
.
PET 25 C2