Product Set Up - Nuna triv Mode D'emploi

Product Set Up

Open Stroller
1
- Take the stroller frame out. (1)
2
- Rotate the handle up to open the stroller frame. (2)
3
- Pull the seat to open it. (3)
A "click" sound means the seat is open.
Check that the stroller is completely latched open before
continuing.
Switch Seat
Please switch seat if you needed.
1
- Press the seat release button (4)-1 and lift the seat up
(4)-2.
2
- Reverse the seat, and then attach it to the frame. (5)
A "click" sound means the seat is attached completely.
Front Wheels
1
- Insert the front wheel into the front leg. (6)
A "click" sound means the front wheel is assembled
completely.
Check the wheel is securely attached by pulling out.
Repeat on opposite side.
2
- To remove the front wheel, press the release button (7)-1
and detach the front wheel from the front leg (7)-2.
TRIV instructions
11
Rear Wheels
1
- Insert the rear wheel into the rear leg. (8)
A "click" sound means the rear wheel is assembled
completely.
Check the wheel is securely attached by pulling out.
Repeat on opposite side.
2
- To remove the rear wheel, press the release button (9)-1
and detach the rear wheel from the rear leg (9)-2.
Arm Bar
Always secure the child with the harness. The arm bar is
not a restraint device.
1
- Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place. (10)
A "click" sound means the arm bar is assembled
completely.
2
- To remove the arm bar, press the arm bar release buttons
(11)-1 and remove the arm bar (11)-2.
Check Set Up
Stroller frame is latched open
Stroller seat securely attached
Rear and front wheels securely attached
Arm bar securely attached
TRIV instructions
12