Product Set Up - Nuna Mixx Next Mode D'emploi

Product Set Up

Open Stroller
1
- Open the storage latch as shown (1). Rotate the handle to
the rear of the stroller. A "click" sound means the stroller
frame is open completely. (2)
2
- Squeeze the recline adjustment button on the back of
the seat and rotate the backrest to the upright position.
(3)
Check that the stroller is open completely before
continuing.
Canopy
1
- Zip the canopy visor to the inside of the canopy. (4)
2
- Insert the canopy clips into the canopy mounts on the
sides of the stroller. A "click" sound means the canopy is
assembled completely. (5)
Front Wheels
1
- Insert the front wheel into the front leg. A "click" sound
means the wheel is assembled completely. (6) Repeat on
opposite side.
Check the wheel is securely attached by pulling out.
2
- To remove the front wheel, press the release button (7)-1
and detach the front wheel from the front leg. (7)-2
Rear Wheels
1
- Insert the rear wheel into the rear leg. A "click" sound
means the rear wheel is assembled completely. Repeat
on opposite side. (8)
11 MIXX next instructions
Check that the wheels are securely attached by pulling
them out.
2
- To remove the rear wheel, press the release button (9)-1
and detach the rear wheel from the rear leg. (9)-2
Armbar
Always secure the child with the harness. The armbar is
not a restraint device.
1
- Align the armbar ends with the armbar mounts, and
insert until it clicks into place. A "click" sound means
the armbar is assembled completely. (10)
2
- To remove the armbar, press the armbar release buttons
(11)-1 and lift the armbar up. (11)-2
3
- For a more compact fold when the seat is rear facing,
press the armbar adjustment buttons (12)-1 and rotate
the armbar down (12)-2 until it clicks into place.
NEVER use the armbar in lowered/folded position when
child is in stroller.
The completely assembled stroller is shown as (13).
Check Set Up
Stroller frame is latched open
Front wheels, rear wheels securely attached
Canopy mount attached to stroller frame and
canopy attached to seat pad
Armbar is securely attached
MIXX next instructions 12