Product Set Up - Nuna ivvi savi Mode D'emploi

Product Set Up

Opening the Nuna IVVI savi
Check that you have all the parts for this product before
using it. The assembly should be performed only by adults.
1
- Rotate handle upward (1). Attach the seat to the frame.
(2)
2
- Check that the pushchair is completely latched open
before continuing.
Assemble Front Wheels
1
- Assemble front wheels to front legs. Check that wheels
are securely attached by pulling down. (3)
2
- To disassemble front wheel, detach front wheel from
front leg (4)-2 while pressing the release button. (4)-1
Assemble Rear Wheels
1
- Assemble rear wheels to rear legs. Check that wheels
are securely attached by pulling outward. (5)
2
- To disassemble rear wheel, detach rear wheel from rear
wheel mount (6)-2 while pressing the release button.
(6)-1
Assemble Canopy
1
- Clip the canopy mounts onto the seat, then close the
zippers. (7) (8)
2
- Open the zippers, then remove the canopy mount to
remove the canopy.(9)
10 IVVI savi pushchair Instructions
Assemble Armbar
1
- Align the armbar ends with the armbar mounts, and then
insert to lock. (10)
2
- To disassemble armbar, press armbar release button
(11)-1, and then pull out the armbar. (11)-2
3
- The completely assembled pushchair is shown as (12)
IVVI savi pushchair Instructions 11