Accessories - Nuna triv Mode D'emploi

Front Swivel Locks
It is recommended to use the front swivel locks on uneven
surfaces.
1
- Pull the front swivel lock up to lock the front wheel. (24)
2
- Push the front swivel lock down to unlock. (25)
Fold
The stroller can be folded with forward facing seat or rear
facing seat or without the seat. Before folding the stroller,
adjust the handle to the lowest position and make sure the
front swivel locks are unlocked.
1
- Fold the canopy. (26)
2
- Press the folding release button (27)-1 on the middle
of the recline adjustment button and then squeeze the
recline adjustment button (27)-2.
3
- Fold the seat. (28)
4
- Pull the folding webbing of the seat to fold the stroller.
(29)
5
- The stroller with forward facing seat can stand by
wheels, and with rear facing seat can stand by handle
and the rear wheels. (30)
6
- Press the folding buttons of the seat mounts. (31)
7
- Fold the stroller. (32)
The stroller without seat can stand by handle and the rear
wheels.
Insert
1
- To assemble the insert, place the insert over the seat and
thread the shoulder, waist and crotch harnesses through
their respective slots. (33)
2
- Attach the hook and loop fasteners. (34)
TRIV instructions
15

Accessories

Not all accessories are included on some models.
Post Adaptors
For Nuna infant carrier and TRIV carry cot assembly and
usage, please refer to the infant carrier and carry cot
instruction manual.
1
- To attach the post adapters, place the post adapters
on the seat mounts. A "click" sound means the post
adapters are attached. (35)(36)
2
- To attach infant carrier, place the infant carrier on the
post adapters. A "click" sound means the infant carrier is
attached. (37)
3
- To attach carry cot, place the carry cot on the post
adapters. A "click" sound means the carry cot is
attached. (38)
4
- The infant carrier can be attached rear or forward facing
on the post adapter. (39)
5
- The carry cot can be attached rear or forward facing on
the post adapters. (40)
6
- To remove the infant carrier, push the release buttons on
the infant carrier (41)-1 and lift up (41)-2.
7-
To remove carry cot, press the release buttons on the
side of the carry cot (42)-1 and lift up (42)-2.
8
- To remove the post adapters, pull the adapter release
buttons (43)-1 and lift up (43)-2.
Remove the infant carrier and carry cot before folding.
TRIV instructions
16