ContentsOfTheBox; HowToSetUpTheNunaMixx; AssembleCanopy; AssembleArmbar - Nuna MIXX Mode D'emploi

ContentsoftheBox

Stroller Frame
Front Wheel
Rear Wheel
Armbar
Rain cover
Adapter
Canopy Visor
Brake Assembly
Tools Needed: None
HowtoSetUpthe
NunaMIXX
OpeningtheNunaMIXX
Check that you have all the parts for this product before using it. The
assembly should be performed only by adults.
1 Separate storage latch from storage mount
(2)
upwards , a click sound means the stroller is open completely.
Rotate the backrest to vertical position .
2 Check that the stroller is completely latched open before continuing.

AssembleCanopy

1 Align the canopy visor zipper with the zipper on the inside of the front
(3)
canopy edge.
2 Completely zip the canopy visor onto the canopy.
3 Insert the clips of canopy to the mount on the tubes.
13
All manuals and user guides at all-guides.com
(1)
, and then lift the handle
(3)
(4)
AssembleFrontWheels
1 Assemble front wheels to front legs.
Check that wheels are securely attached by
pulling down.
2 To disassemble front wheel, detach front wheel from front leg
while pressing the release button.
AssembleRearWheels
1 Assemble brake assembly to rear legs
(8)
brake assembly . Wrap the connecting tube of rear legs with the
flap of the storage basket, and then snap the three snap buttons
Check that wheels are securely attached by
pulling on wheel assemblies.
2 To disassemble rear wheel, detach rear wheel from rear wheel mount
(10)-2
while pressing the release button.

AssembleArmbar

1 Align the armbar ends with the armbar mounts, and then insert to lock.
(11)
2 To disassemble armbar, press armbar release button
(12)-2
pull out the armbar.
3 Attach the buttons on the both sides of the soft goods and the seat.
(13)-1
The completely assembled stroller is shown as
(5)
(6)-2
(6)-1
(7)
, assemble rear wheels to
(9)
(10)-1
(12)-1
, and then
(13)
.
.
14