Description Of The Appliance; Important Advice - UFESA AC5818 Mode D'emploi

All manuals and user guides at all-guides.com
ENGLISH
DESCRIPTION OF THE
APPLIANCE
1. Floor brush.
2. Brush for wooden flooring (AC5918
/AC5920)
3. Telescopic tube.
4. Hose
5. Suction hole
6. On/Off button
7. Air outlet grille
8. Dust container release clip
9. Automatic cable rewind pedal
10. Crevice nozzle
11. Upholstery nozzle (AC5818 / AC5918).
12. Furniture nozzle
13. Air outlet filter
Cycle-Tech unit
14. Container
15. Lid
16. Carrying handle
17. Permanent HEPA filter.
HEPA filter guard
18.
19. High temperature safety valve

IMPORTANT ADVICE

• Read these instructions
Safeguard them for future reference.
• Before plugging the appliance into the
mains supply, make sure that the voltage
corresponds to that stated on the charac-
teristics plate.
• This appliance has been designed for
domestic use only. It must only be used in
accordance with these instructions. The
manufacturer will not be held responsi-
ble for any damage caused by improper
or misuse of the appliance
• Do not use the vacuum cleaner on
people or animals.
• Never vacuum up hot or glowing
substances, sharp objects, wet or liquid
substances, or inflammable or explosive
products.
• Do not let children handle the applian-
ce.
• This vacuum cleaner must not be used
without the Cycle Tech unit and the per-
manent HEPA filter. This could damage
the appliance.
• The appliance must be switched off
before plugging it in or unplugging it.
• Do not operate the appliance with the
cable still coiled.
• Do not unplug the appliance by tug-
ging on the cable.
• Unplug the vacuum cleaner from the
mains supply when not in use and before
proceeding to clean it or when changing
AC5918... 8
the filters.
• Do not expose the vacuum cleaner to
outdoor weather conditions, dampness
or heat. Do not leave the vacuum beside
hot ovens, heaters or radiators.
• Do not use the vacuum cleaner if any
of its openings are obstructed, as this will
reduce the air flow causing it to overheat,
which may damage the appliance.
• Do not handle either the vacuum or the
plug with wet hands. Do not immerse the
appliance in water.
• Do not pull on either the cable or the
suction tube to move the vacuum cleaner.
Use the carry handle.
• Do not use the appliance if either the
cable or plug are damaged.
• Make sure not to pinch the cable when
closing doors.
• Always unplug the vacuum cleaner
after use and especially when cleaning
it, changing the filter or emptying out the
dust container.
• Do not switch the appliance on if the
cable or plug are damaged or if it can be
carefully.
detected that the appliance is not wor-
king correctly.
• Cable repairs
must be carried out exclusively by an
Authorised Technical Service Centre.
SUCTION SYSTEM
This appliance operates without a dust
bag using "Cycle-Tech" technology. To do
this just attach the unit.
This system allows you to clean your
home efficiently without having to
purchase replacement dust bags. An
efficient filtering system, which includes
a HEPA class antiallergic filter, guarantees
perfect cleaning.
SWITCHING ON
– Insert the hose into the suction hole so
that it clicks into position.
Pressing down the release button will
help you to insert or remove the hose
(fig. 1).
– Attach the telescopic tube to the suc-
tion hose and adjust the length to suit the
user (Fig. 2)
– Fit the brush, or whichever accessory is
required, to the suction tube (fig. 3).
– Pull the cable out and plug it into the
mains supply.
– Press the On/Off button (fig. 4).
– The set of wheels, the 360º swivel
and replacements
22/7/05, 12:20