Changing The Vip Code; Checking The Vip Code - Topcom Butler 2450 Mode D'emploi

All manuals and user guides at all-guides.com
HANDL. B2450_euro.qxd 19/7/02
Butler 2450
Notes:
• If you do not press any keys for 8 seconds, the previous day/time setting is saved and the machine
automatically exits the day/time setting mode.
• When you use the machine for the first time and have not yet set the day/time, no day/time registration
of incoming messages is recorded.
• If there is a loss of power to the base, the day/time must be re-entered.
7.8 Checking Day/Time
• Press the key to announce the day/time. The internal voice will say the current day/time
setting.
7.9 Programming the VIP Code
The VIP code is a 3-digit code used to operate the machine remotely (see Remote Operation).
The VIP code is set to '321' by default.
Note: If there is a loss of power to the base, the VIP code will revert to '321'.

7.9.1 Changing the VIP Code

• Keep the - key pressed down for 2 secs to change the VIP code.
• The internal voice asks you to set the VIP code and says the first number.
• Press a few times on
• Press the de
2nd digit of the VIP code.
• Press a few times on
• Press the key
3rd digit of the VIP code.
• Press a few times on
• Press the de
voice says the new VIP code for confirmation.
Note: If you do not press any keys for 8 seconds, the previous VIP code is saved and the machine
automatically exits the VIP setting mode.

7.9.2 Checking the VIP Code

• Press the key to play the VIP code. The internal voice says the current VIP code.
7.10 Operation
If a call is received and the answering machine is turned on, the answering machine will auto-
matically pick up the line after the set number of rings. If
• outgoing message 1 has been selected, it will be played. After the outgoing message, a beep
will be heard and the caller can leave a message (of a max. 3 minutes).
• Outgoing message 2 has been selected, it will be played. After the beep, the line will
automatically be disconnected. The caller does not have the possibility to leave a message.
Note: If, during pick-up, nothing is said for 8 seconds, the line will be automatically disconnected.
2:56 pm Page 29
or keys to set the first number of the VIP code.
key to confirm the first number. The internal voice says the current set
or keys to set the second digit of the VIP code.
to confirm the second number. The internal voice says the current set
or keys to set the third digit of the VIP code.
key to confirm the VIP code. You will hear a long beep. The internal
29 29