Handset Pin Code; Changing The Handset Pin Code; The Rfpi Code - Topcom Butler 2000 Mode D'emploi

Butler 2000
5.11.2 Deactivating a Direct Call number
Press the Escape button

5.12 Handset PIN code

The new handset PIN code will only replace the current one, if the new PIN code is
entered correctly twice and if the procedure is not interrupted. It is possible to reset
the handset PIN code to the factory setting : 1590.

5.12.1 Changing the Handset PIN code

• Press the Function button until "H-CHANGE PIN"
is displayed.
• Press the OK button.
• "PP PIN :" is displayed.
• Enter the current PIN code and press the
OK button.
• When "NEW PIN" is displayed, enter the new
handset PIN Code and press the OK button.
• Then "RETYPE" is shown on the display.
• Enter the new PIN code once again.
• Press the OK button to confirm and the unit
returns to the "H-CHANGE PIN" menu.

5.13 The RFPI code

This function allows you to display the RFPI code. The RFPI code is the identification
code of the base unit to which the handset belongs.
• Press the Function button until "SHOW RFPI"
is displayed.
• Press the OK button.
• The RFPI Code is shown on the display.
• Press the OK button, the unit returns to the
"SHOW RFPI" menu.
twice rapidly to deactivate the Direct Call function.
68 68 68 68 68 68 68 68
H--CHANGE PIN
PP PIN:
NEW PIN:
R E T Y P E :
H--CHANGE PIN
SHOW RFPI
00004--00 1AB
SHOW RFPI