Barring Outgoing Calls; Direct Call - Topcom Butler 2450 Mode D'emploi

All manuals and user guides at all-guides.com
HANDL. B2450_euro.qxd 19/7/02
Butler 2450

4.29 Barring outgoing calls

You can program the handsets to bar calls to certain telephone numbers so that for instance '00'
international numbers cannot be called. Up to 5 numbers (of max. 5 digits) can be barred.
To do this, do the following:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'PIN' appears on the display.
• Enter your PIN code
• Press the Programming key
• 'BAR NUM ' appears on the display. You are in memory "1. _ _ _ _ _".
• Press the Up or Down key
• Enter the number (max. 5 digits) to be barred, e.g. 01486.
• Press the Programming key
• 'HS _ _ _ _ _' (= number on the handset (1-5)) '01486' (= the barred numbers) appear on
the display.
• Enter the numbers of the handsets from which the barred numbers cannot be called.
• e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486
These handsets can no longer dial numbers beginning with '01486'.
• Press the Programming key
Repeat the same procedure described above if you would like to bar other numbers (max. 5)!

4.30 Direct Call

By setting a Direct Call number, the phone will automatically take the line and dial out this
number. This function is useful to use the phone as a emergency phone.
4.30.1 To program the Direct Call number
• Press the Programming key
• Press the up or down key until 'DIRECT' appears on the display
• Press the Programming key
• If necessary, delete the existing number by pressing the Delete-key a few times
• Enter the direct number
• Press the Programming key
4.30.2 Turn the Direct Call function ON/OFF
To turn it ON:
• Press the Programming key
• Press the up or down key until 'DIRECT' appears on the display
• Press the mute-key for 2s
• 'DIRECT ON' appears on the display
To turn if OFF:
- Quick press the Programming key twice
2:56 pm Page 22
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BARRING' appears on the display.
.
.
to select one of the 5 memories.
.
to confirm your selection.
22 22 22 22 22 22 22 22 22 22 22 22