Remote Operation - Topcom Butler 2450 Mode D'emploi

All manuals and user guides at all-guides.com
HANDL. B2450_euro.qxd 19/7/02
Butler 2450

7.15 Remote Operation

The answering machine can only be operated remotely using a tough-tone phone (DTMF tone
selection system).
• Call your machine.
• The answering machine picks up the line, you hear the outgoing message and a beep.
• After the beep, slowly dial the VIP code (default 321).
• You will hear two short beeps for confirmation.
• Enter the next codes to use the desired function :
a) Listening to Messages
• Press '2' (listen to messages). The answer machine will play the messages.
During playback, you have the following options:
• Press '2' to stop playback.
• Press '2' to restart playback.
• Press '3' to go to the next message.
• Press '1 1' to go to the previous message.
• Press '1' to repeat the current message.
• Press '6' to stop playback.
• Press '7' to erase the current message.
b) Erasing All Old Messages
After listening to all messages, press '0' to erase all messages.
c) Playing Outgoing Message
• Press '4' to play the current outgoing message.
d) Recording Outgoing Message
• Press '9' to select OGM 1 or OGM 2.
• Press '5' to start recording
• A beep will indicate that you can start recording.
• Say your message.
• Press '6' to stop recording.
Note: Recording will be automatically interrupted after 2 minutes.
e) Turning Answering Machine On/Off
• Press the '9 ' key to switch on the answering machine.
• Press the '8' key to turn off the answering machine.
f) Ending Remote Operation
If you want to end remote operation, press '6'.
2:56 pm Page 31
31 31