Changing The Pin Code - Topcom Butler 2405 Mode D'emploi

Masquer les pouces Voir aussi pour Butler 2405:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Butler 2405/2410
Butler 2405/2410
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• The current status appears on the display:
- 'CLICK ON': turn on key click
- 'CLICK OFF': turn off key click
• Press the Up or Down key
• Press the Programming key
4.22 The R key (flash)
Press the Flash key 'R' to use certain services such as "call waiting" (if your telephone company
offers this feature); or to transfer calls if you use a telephone exchange (PABX). The Flash key
'R' is a brief interruption of the line. You can set the flash time to 100ms or 250ms. This is set
to 100ms by default! However, if your system requires a longer flash time, do the following:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
- SHORT = 100ms
- LONG = 250ms
• Press the Programming key

4.23 Changing the PIN code

Certain functions are only available if you know the PIN code of the telephone. Thanks to this
secret code, settings are displayed that only you can change. The PIN code has 4 digits. The
default PIN code setting is '0000'. If you would like to change the default PIN code and set
your own secret code, do the following:
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'OLD CODE' appears on the display.
• Enter the old PIN code. Use the number keys.
• Press the Programming key
• 'NEW CODE' appears on the display.
• Enter the new PIN code in. Use the number keys.
• Press the Programming key
• 'AGAIN' appears on the display.
• Enter the new PIN code again. Use the number keys.
• Press the Programming key
• You hear a confirmation tone. The new PIN code has been set.
.
repeatedly until 'KEY CLICK' appears on the display.
.
to make your selection.
to confirm your selection.
.
repeatedly until 'SETTING' appears on the display
.
repeatedly until 'RECALL' appears on the display.
.
repeatedly to select the flash time:
to confirm your selection.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'PIN CODE' appears on the display.
.
.
.
.
19
19
19
19
19
19
19
19
19
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Butler 2410

Table des Matières