Special Accessory Installation - Truma Mover SX Mode D'emploi / Instructions De Montage

6. For mounting in front of the axle on the
AL-KO chassis M with a continuous frame and a
permissible gross weight of 1900 kg – 2000 kg
In order to compensate for overlapping frame edges, the
adapter kit AL-KO M 1900 - 2000 kg must be used.
7. Installation on Eriba Touring chassis
The Eriba Touring adapter kit is absolutely essential for the
Eriba Touring chassis.
8. Installation on Eriba Touring Troll chassis
The Eriba Touring Troll adapter kit is absolutely essential for
the Eriba Touring Troll chassis.
9. Installation on chassis with L-profile and with a lim-
ited amount of space
The short mounting system is required to compensate for
the height (30 or 60 mm) with substructures such as tanks.

Special accessory installation

1. Spacer kit 30 mm
For compensating for height on caravans with a frame height
of < 170 mm to 140 mm,
part no. 60030-95000.
Figure 8
2. Spacer kit 60 mm
For compensating for height on caravans with a frame height
of < 140 mm to 110 mm,
part no. 60030-95100.
Figure 9
3. Low chassis kit
For compensating for height on caravans with a frame height
of less than 110 mm and / or for bridging struts,
part no. 60010-64900.
Figure 10
If a low chassis kit is used in Germany, acceptance
by a vehicle expert is required.
22
4. Low chassis kit, short
For compensating for height on caravans with
a frame height of less than 110 mm,
part no. 60030-37600.
Figure 11
If a low chassis kit is used in Germany, acceptance by a
vehicle expert is required.
5. Adapter kit AL-KO Vario III / AV
Essential for caravans with AL-KO Vario III / AV chassis
(frame thickness less than 2.8 mm),
part no. 60010-21500.
Figure 12
6. Adapter kit AL-KO M short to 1800 kg
For chassis with a permissible gross weight of up to
1800 kg
For compensating for frame edges for caravans with
AL-KO chassis M. The adapter kit is required for mounting in
front of the axle when the chassis is set to the minimum length,
part no. 60031-00132.
Figure 13
7. Adapter kit AL-KO M to 1800 kg
For chassis with axial displacement with a permissible
gross weight of up to 1800 kg
For compensating for frame edges for caravans with
AL-KO chassis M. The adapter kit is needed for mounting in
front of the axle, part no. 60030-38600.
Figure 13a