Environment; General Information; Bluetooth - Festool CARVEX PSC 420 EB Notice D'utilisation D'origine

To connect two Systainers
Place one Systainer on the top of the other
(Fig. [SYS-a]).
Turn the T-loc [SYS-b-1] to one of
this positions (Fig. [SYS-b]).
The Systainers are connected and locked.
A Systainer Classic Line can be connected
to a Systainer T-Loc or to a Systainer
from below via its four locking devices.
A Systainer T-Loc can be connected to a
Systainer 3 both from below and from
above.
SYS-b-1

13 Environment

Do not dispose of the device together with do­
mestic waste! Dispose of machines, accesso­
ries and packaging at an environmentally re­
sponsible recycling centre. Observe the valid
national regulations.
Battery Disposal
3
Risk of fire or injury
► Do not attempt to disassemble the battery
or remove any component projecting from
the battery terminals.
► Prior to disposal, protect exposed termi­
SYS-a
nals with heavy insulating tape to prevent
shorting.

14 General information

14.1 Bluetooth

The Bluetooth
registered trademarks of Bluetooth SIG, Inc.;
they are used by TTS Tooltechnic Systems AG &
Co. KG, and therefore by Festool, under licence.
SYS-b
WARNING
®
word mark and the logos are
®
English
19