Capacity Display; Settings; Changing Tools - Festool CARVEX PSC 420 EB Notice D'utilisation D'origine

English
Risk of injury! Always remove the belt
clip from battery packs from the BPC
series prior to use.
8.1

Capacity display

The capacity display [1-16] indicates the charge
of the battery pack for approx. 2 seconds after
the button [1-15] is pressed:
Recommendation: Charge the battery pack
*
before any further use.
Further information about the charger and
battery pack with capacity indicator can be
found in the corresponding operating
manual.
9

Settings

WARNING
Risk of injury, electric shock
► Always disconnect the battery packs from
the machine before performing any type of
work on the machine!
12
2b
70‑100%
40‑70%
15‑40%
< 15% *
9.1

Changing tools

CAUTION
Risk of injury from hot and sharp insertion
tool
► Do not use any blunt or faulty insertion
tools.
► Wear protective gloves when handling an
insertion tool.
Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
Selecting the saw blade
Only use saw blades with a T-shank. The
saw blade should not be longer than that
required for the intended cut. To ensure safe
guidance, during the cut the saw blade should
emerge at the bottom of the workpiece at every
point.
Only use cross-set saw blades when using
angle tables and base adapters. We rec­
ommend the S 105/4 FSG Festool saw
blade.
Only saw materials for which the saw blade in
question has been designed.
Festool saw blades for jigsaws are colour-cod­
ed. The colour represents the material for
which the saw blade is suited.
Colour Material
Yellow Wood
Red Plastics
Green Building materials
Blue Metal
More information can be found on the packag­
ing, in your Festool catalogue or at
www.festoolusa.com.
Inserting the saw blade
Always disconnect the power tool from
the power supply before changing
blades.
► If necessary, lift up the chip guard [3-1].