Transport; Environment; Eu Declaration Of Conformity - Festool CARVEX PSC 420 EB Notice D'utilisation D'origine

C A R V E X
GB
Mount the adaptation table [9-1] on the
saw table support.
Close the change lever [1-8].
Ensure that the adaptation table is firmly seat-
ed in the guide.
Use the extractor connector [1-7] also
with the adaptation table.
Adaptation to the guide rail FS 2
The Festool guide system FS 2 (Fig. [10])
makes it much easier to manufacture straight
precision cuts.
Place the jigsaw with attached adaptation
table [9-1] on the guide rail.
Adaptation to the circle cutter
The circle cutter can be used to create circular
cuts with a diameter between 120 and 3000
mm. The circle cutter can be installed from
both sides on the adaptation table.
Place the jigsaw with attached adaptation ta-
ble on the adapter [11-1] on the circle cut-
ter.
Insert the centring mandrel [11-2] in the
hole [11-4] on the circle cutter aligned
with the saw blade.
Clamp the measuring tape to the circle cut-
ter using the rotary knob [11-5].
Recommended when using the circle cutter:
Cut in an anticlockwise direction.
Work at a slow rate of advance.
Set the pendulum stroke [1-11] to 0 - 1.
Set the stroke rate [1-5] to 1 - 5.
Store the centring mandrel in the depot
[11-3].
11

Transport

The equivalent amount of lithium in the LiIon
battery pack is less than the applicable limit
value and certified as per UN manual ST/SG/
AC.10/11/rev. 3 part III, subsection 38.3. The
LiIon battery pack is therefore not subject to
national and international dangerous goods
regulations, neither as an individual compo-
nent nor as a fitted machine component. How-
ever, dangerous goods regulations may apply
when several battery packs are transported, in
which case you may have to fulfil special con-
ditions. Refer to ADR special regulation 230 for
more information relevant for the EU.
22
All manuals and user guides at all-guides.com
12
EU only: European Directive 2002/96/EC stip-
ulates that used electric power tools must be
collected separately and disposed of at an en-
vironmentally responsible recycling centre.
Return used or faulty battery packs to your
local specialist retailer, Festool after-sales ser-
vice or a designated public waste manage-
ment facility. The battery packs will then be
recycled. (Observe the regulations applicable
in your country). The batteries must be dis-
charged on return.
EU only:
stipulates that faulty or used battery packs/
batteries must be recycled.
Information on REACh:
www.festool.com/reach
13
Cordless jigsaw
PSBC 420 EB
PSC 420 EB
Year of CE mark: 2012
We declare under sole responsibility that this
product complies with the following directives
and standards:
2006/42/EC, 2004/108/EC, EN 60745-1, EN
EN 60745-2-11, EN 55014-1, EN 55014-2.
Charger
TRC 3
Year of CE mark: 2007
We declare under sole responsibility that this
product complies with the following directives
and standards:
2004/108/EC, 2006/95/EC, 2011/65/EU (af-
ter 03.01.2013), EN 60335-1, EN 60335-2-29,
EN 61000-3-2, EN 61000-3-3, EN 61204-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation

Environment

Do not dispose of the device in
household waste! Recycle devices,
accessories and packaging. Observe
applicable country-specific regulations.
European Directive 91/157/EEC

EU Declaration of Conformity

10003823, 10005015
Serial no.
494635, 494636, 494637
Serial no.
10003824
15.05.2012