Publicité
Les langues disponibles
Les langues disponibles
Mounting the sec-
ond earthing
socket at the rear
(3)
(1+9)
Mounting the second earthing socket
Threading in the cable
Connecting the cable to the front current socket
12
All manuals and user guides at all-guides.com
(g)
(8)
(2)
(k)
(j)
(i)
(h)
(8)
(3)
Mount the rear (-) current-socket (1),
1
complete with its blanking cap (9):
-
-
-
-
-
IMPORTANT! The recess in the current so-
cket must point downwards.
Thread the cable (8) through the rub-
2
ber lead-throughs (f) and (g)
(f)
Connect the cable to the front current
3
socket (1):
-
Housing
-
-
-
-
-
(1)
-
Insert the rear (-) current-socket
(1), working from the outside to-
wards the inside
Insert insulating washer
Screw on the hexagonal nut
Tighten the hexagonal nut with the
torque wrench, width 32
Thightening torque 35 Nm
Put the belleville spring washer (i)
over the hexagon head screw (h)
Put the star (j) over the hexagon
head screw (h)
Put the cable lug of the cable (8)
over the hexagon head screw (h)
Put the cable lug of the existing
current cable (k) over the hexagon
head screw (h)
Screw the hexagon head screw
(h) into the current socket
Tighten the hexagon head screw
(h) with the torque wrench, width
19
Thighting torque 15 - 35 Nm
Publicité
