Settings; Overview Of Commands; General Information; Command List - Sentiotec RS485 Instructions De Montage Et Mode D'emploi

Installation instructions, only for experts

4. Settings

Baud rate: 57600
Data bits: 8
Stop bits: 1
Parity: No

5. Overview of commands

5.1. General information

● Structure of commands (CMDs)
– Status queries: get (parameter)
Response (ACK): (PARAMETER) (ON/OFF) ;
– Value queries: get (parameter) val
Response: (PARAMETER) (VALUE) (UNIT) ;
– Status settings: set (parameter) (on/off)
Response: (PARAMETER) (ON/OFF) ;
– Value settings: set (parameter) val (value)
Response: (PARAMETER) (VALUE) (UNIT) ;
● The CMDs are terminated with CR (carriage return).
● An LF (line feed) is not necessary.
● Each ACK is ended with ";".
● Value setting and value query ACKs feature a space before the final ";".
Status setting and status query ACKs feature the ";" directly after the ON or OFF.

5.2. Command list

Func­
tion
CMD
Sauna set
set
get
get
Commands (CMD)
Param­
Status Value
eter
sauna on/off
sauna val
sauna
sauna val
Switches the sauna heater on/off
30-110 Sets a selected value between 30
and 110 °C as the preset temperature
Queries the sauna status (on/off)
Queries the preset temperature
p. 6/12
Description