Service Mode - IFM Electronic efector 190 Data Matrix Notice Pour Utilisateurs

Service mode

In the service mode the image decoded last will be displayed together with the cor-
ners of the code recognised and the information about the module colours detected
as yellow and blue dots.
All relevant information of the active configuration data file, the image captured dur-
ing the last reading and, if applicable, the image captured during the last failed read-
ing are stored in the report file dm_report.html on the PC via the
Service report for last reading
You can select and open the service report via the
in the File menu. You can enquire about the folder into which the service report is
saved via the Show resource paths....
er you indicated during program installation.
You have other possibilities in the service mode:
• If a reading has failed the corresponding image is saved and you can store this failed
image for diagnostic or documentation purposes on your PC via the
Save failure image [bitmap]
• The image captured last can be stored on the PC via the
ton.
• You can reset the counters for the total number of readings and the number of the
good readings via the
Info
The images are stored in the same directory as the service report.
Monitor
By activating the
itor mode. You will change to the
Parameter
button.
button.
menu item in the
button.
Reset statistics
button.
button you will return from the service mode to the mon-
Manage configuration data
Open service report....
Help menu. This is the fold-
Save image [bitmap]
dialogue page via the
menu item
but-
49