Perform Overall Function Test - IFM Electronic efector 190 Data Matrix Notice Pour Utilisateurs

Perform overall function test

In this dialogue page you can test all settings made.
In the Testing mode an image is captured and evaluated with each triggering. The
status and the result of the reading process will be displayed in the output window
and transmitted via the process interface. Successful reading is signalled on the read-
er by a yellow LED and failed reading by a red LED.
The reader counts the total number of reading processes and the number of good
readings and indicates them in the output window. You can reset both counters to 0
via the Reset statistics button.
To enable a detailed analysis of the problems during the reading process the deter-
mined corners and the colour of each Data Matrix module determined by the reader
will also be represented. The module colour is visualised as a coloured dot on the
module. A blue dot on the module means that the reader has identified the module
as a light module, a yellow dot identifies a module recognised as being dark.
47