Maintenance Of Machines (Dealer) - Conti XEOS EVOLUTION 2 Notice Technique

35.

MAINTENANCE OF MACHINES (DEALER)

M
AINTENANCE MUST BE EFFECTED BY OUR DEALERS
1- See installation manual (daily and weekly maintenance)
2- Check sensor
If necessary remove scale
3- Check seal of 12 bars pressure relief valve, depressor, and non return valve
Change if necessary
4- Check the water inlet filter
Clean if necessary
5- Check spray nozzle
Change if necessary
6- Check solenoid connections
Clean or change as necessary
7- Change the seal 407501 of the 2 steam taps
NOTE: The regeneration of the water softener is the responsibility of the client - CONTI takes no
responsibility for faults if this is not carried out.
SACOME, Document CONFIDENTIEL,
SACOME, CONFIDENTIAL Document,
Edition 07/2008 - XEOS EVOLUTION 2 - XEOS TALL CUP
NOTES TECHNIQUES - TECHNICAL DOCUMENTS - page 48
it is forbidden to duplicate or communicate this document without previous authorization.
Ne peut être reproduit ni communiqué sans notre accord préalable.
1-
1-
1-
1-
1-