27.
ACCESS VIA THE SIDE PANELS
REMOVING THE SIDE PANEL
Remove the cup warmer
For ULN version, take off the 4 screws before removing the cup warmer
Remove the hook
Take down the higher (on the rear)
Once this taken down part, draw the whole to the top
REFITTING THE SIDE PANEL
Encase the panel in its support
Place the base of the panel against the frame, lock the lower back side of the panel into position,
then the front side, leaving the panel slightly inclined
Set up the top of the side panel then engage it in
simultaneously.
Close again the hook which maintains the side panel
1
SACOME, Document CONFIDENTIEL,
SACOME, CONFIDENTIAL Document,
(standard machine)
which maintains the side panels, by passing the hand inside the machine.
, without forcing too much.
.(pour les Xéos TC)
1'
3
Edition 07/2008 - XEOS EVOLUTION 2 - XEOS TALL CUP
NOTES TECHNIQUES - TECHNICAL DOCUMENTS - page 36
it is forbidden to duplicate or communicate this document without previous authorization.
delicately.
' (pour les autres machines)
its housing and make return the front panel
, and fix the cup warmer again.
XEOS TC
4
Ne peut être reproduit ni communiqué sans notre accord préalable.
'.
2
XEOS EV
4'