brondell Swash S1200-EW Manuel De L'utilisateur page 27

USING THE SWASH 1400's ADDITIONAL FEATURES
Nozzle Oscillation (Move) Function
While the wash function is operating, press the Move button on the remote control to start or
stop the nozzle oscillation function (moving back and forth). This provides a wider range of wash
spray.
Warm Air Dryer Function
Once the wash cycle is complete, press the Dry button to activate the warm air dryer. The dryer
will run for two minutes. To keep the dryer running longer than two minutes, press the DRY button
again during the drying cycle to add another two minutes. If you would like to stop the dryer
before the two minutes has elapsed, press Stop.
While the air dryer is operating press the Water Pressure / Dry Temp "+" and "–" to adjust the
dryer temperature to a comfortable level. There are four settings: Off - Low - Medium - High.
NOTE: the Seat Sensor must be activated in order for this function to work, unless the Seat
Sensor has been cancelled (see page 27 for details).
Deodorization
To activate the deodorizer, press the Deodorize button on the remote control. The deodorizer will
run for one minute. To stop the deodorizer prior to completion of the cycle, press Stop.
Nozzle Sterilization
To sterilize the stainless steel nozzles, press the Sterilize button on the remote control. A
cleansing silver oxide nano-particle water treatment will commence. The cleansing spray will
last for 60 seconds while the nozzles extend and retract. To stop the nozzle sterilization prior to
completion of the cycle, press Stop.
The Silver oxide nano-particle treatment system has powerful anit-fungal and anti-bacterial
properties to keep the nozzles clean and corrosion-free. Use the sterilizing feature as often
and frequently as you like. The nano-particles will never lose effectiveness and never require
replacing, lasting the life of the bidet.
25