Mounting - Pelgrim MSK630RVS Notice D'utilisation

INSTALLATION

Mounting

EN 10
All manuals and user guides at all-guides.com
• Mark the drill holes.
• Install the flange and place the electrical unit upright.
• Then screw the hood to the wall using the plugs and screws.
• Fix the mounting bracket of the upper duct to the wall against the
ceiling.
• Connect the waste pipe and then insert the plug into the electrical
unit.
• Put the plug in the wall socket. Ensure that there is no tension on
the wall socket!
• Slide the upper duct into the lower duct.
• Let the ducts drop into the hood.
• Push the upper duct around the wall bracket and screw the wall
bracket on to the mounting bracket with the screws supplied.