Installation Dimensions; Preparation For Mounting - Pelgrim ISW0930 Serie Notice D'utilisation

INSTALLATION

Installation dimensions

Preparation for mounting

250
ø150
270
465
(470)
500
Preparing the recess
• Determine the location for the recess in relation to the hob, either in
the ceiling or in the chimney.
• The hood is fitted with a temporary suspension system with sliders
to make it easier to mount. To use this system, the recess must
have a suspension flange to suspend it temporarily (maximum
height 115 mm). Attention: this flange on the front and back must
be sufficiently strong to support the cooker hood across 4 points.
• The ceiling/chimney must be fitted with a bar that has a minimum
thickness of 36 mm to which the extraction hood can be attached
with the 4 screws. Remember to check the position of the mounting
holes.
250
250
120
640
870
(875)
900
EN 15