EN
Problem
The stirring paddle
does not turn.
Technical Data
Model number:
Article number:
Voltage supply:
Power:
Protection class:
Disposal
The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
used electrical and electronic devices. You can obtain more information from your
local authorities.
All rights reserved.
30
Possible cause / solution
•
Is the mains plug correctly inserted in the plug socket?
•
Is the socket defective?
Try another socket.
•
Check the fuse of your mains connection.
•
Is the On/Off switch in position 1?
•
The consistency of the ice cream is already too hard.
Switch off the device and remove the stirring paddle as
otherwise it could become frozen solid in the ice cream.
Let the ice cream thaw a little and serve it as soon as it
has reached the desired consistency. Remove the ice
cream from the inner container with the aid of a spoon or
similar implement. Do not use the outlet unit!
•
The motor became too hot during use and the device has
switched itself off automatically (overload protection).
Pull the mains plug out of the socket, remove the
stirring paddle to prevent it from becoming fro-
zen solid in the ice cream, and allow the device
to cool down completely before you use it again.
If the consistency of the ice cream is already as you want
it, you can also serve the ice cream directly. Remove
the ice cream from the inner container with the aid of a
spoon or similar implement. Do not use the outlet unit!
•
The device is defective.
Contact the customer service department.
ICM-09
Z 02110
220 – 240 V~ 50 Hz
18 W
II
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1, 19258
Gallin, Germany
Tel.: +49 38851 314650
(Calls subject
to a charge. The
cost varies depending on the
service provider.)