Würth MSF 40 Traduction Des Instructions De Service D'origine page 24

Accessories and spare parts
Repairs to power tools may only be
performed by an electrical specialist!
A defective power cord may only be
replaced with a special, original power cord
from Würth which are available from Würth
masterService.
Use only accessories which satisfy the requirements
and technical data specified in this instruction
manual.
If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
Only use accessories and spare parts which have
been approved by Würth.
Exclusive use of original accessories and original
spare parts ensures that the device can be operated
safely and smoothly.
Disposal
Environmental protection
Electrical devices, accessories and
packaging material must be recycled in
an environmentally compatible manner.
Do not dispose of electrical devices
into household waste!
EU countries only:
In accordance with the EC Directive 2002/96/EC
on Waste Electrical and Electronic equipment and its
implementation into national right, electrical devices,
that are no longer usable, must be collected sepa-
rately and disposed of in an environment-friendly
manner.
24
All manuals and user guides at all-guides.com
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling is
not covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales rep-
resentative or an authorised Würth customer service
workshop. Subject to technical changes without prior
notice. We accept no liability for printing errors.
EC Declaration of Conformity
We declare under our sole responsibility that this
product conforms to the following standards and
directives:
Standards
• EN 60745-1:2009 + A11:2010
• EN 60745-2-22:2011 + A11:2013
• EN 50581:2012
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
• 2014/30/EU
• 2011/65/EU
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
F. Wolpert
Head of Product Man-
agement,
Authorised Signatory
Künzelsau: 07.03.2018
Dr.-Ing. S. Beichter
Head of Quality,
Authorised Signatory