Safety Regulations - Speck pumpen BADU 90/40 Eco MV-E Fiche Technique

2.3

Safety regulations

The operator of the system is responsible for the adherence to all
relevant statutory regulations and guidelines.
2.4 Protective equipment
Reaching into moving parts, e.g. into a coupling, can cause serious
injury.
2.5 Structural modifications and spare parts
Alterations or modifications can affect operational safety.
2.6 Signs
06/2014 VG 766.2000.055
– Personnel which does not yet have suitable qualification must
receive the required training before being given jobs typical of
the system.
– The personnel's responsibilities, e.g. working on the product,
electric equipment or hydraulic systems, are set based on
qualifications and job description.
– The personnel has read this manual and understood the
necessary working steps.
Observe the following regulations when using the pump:
– This manual.
– Warning and information signs on the product.
– Other applicable documents.
– The valid national regulations for accident prevention.
– Internal occupational, operational and safety regulations of the
operator.
Never operate the pump without protective covers.
Never modify or alter the pump without the manufacturer's
permission.
Use only original spare parts and accessories authorised by the
manufacturer.
Ensure that all the signs on the pump unit are legible.
2 Safety
EN 33