Speck pumpen BADU 90/40 Eco MV-E Fiche Technique page 29

Custom Flow: four timer programs which can be set, e.g. for special

water games or party mode
Vacuum Mode: not programmable

Programming BADU
If you operate the pump with an external control, during programming the
motor speed and suction time you have to disconnect the connection to the
external control or separate it from the line voltage!
Setting the time
1 The programming interface is
accessed by pressing the
"Program Menu" button. The time
flashes and can be set by pressing
the "Enter" button.
Settings can only be made when
the pump is in stand-by mode.
2 The arrow buttons are used to set
the time and AM/PM.
The "up/down" buttons are used to
change the values. The "left/right"
buttons are used to toggle between
the fields.
06/2014 VG 766.2100.060
®
90/40 Eco MV-E
EN 29