Setting the priming time
1
The right arrow and "Exit" button
must be pressed and held
simultaneously for approximately
2 seconds to access the menu for
the priming time.
Settings can only be made when
the pump is in stand-by mode.
2
The priming time can be set by
pressing the "Enter" button.
Volumetric flow: 30-100%
Time: 0-10 minutes
3
The volumetric flow and the
priming time period are changed
using the arrow buttons.
The "up/down" buttons are used to
change the values. The "left/right"
buttons are used to toggle
between the fields.
4
Use the "Enter" button to confirm
all settings when they are made.
06/2014
VG 766.2100.060
EN 32