Harness Height Adjustment; Adjusting Buckle Position - Britax Boulevard 65 CS Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Child Seat Functions

Harness Height Adjustment

Loosen the harness.
1
a Lift harness adjuster lever
b Pull both harness straps forward
Squeeze the harness height
2
adjuster, slide the harness
into the desired position and
release.
* Ensure the harness has locked
into position.
NOTE: In rear-facing mode, always position the harness straps at or
below your child's shoulders. See page 6.
In forward-facing mode, always position the harness straps at or
above your child's shoulders. See page 7.
18
All manuals and user guides at all-guides.com
b
a

Adjusting Buckle Position

ImpoRtANt:
• ALWAYS position the buckle in the
inner slot for rear-facing use.
• The vehicle belt must pass in front of
the buckle strap for rear-facing use.
• NEVER leave the buckle in the
adjustment slot.
• Use the outer buckle slot when installing the child seat forward-
facing with a child weighing 13.6 kg (30 lbs) and above or if the
buckle is under the child in the inner
Unbuckle the harness.
1
Remove the belly pad and
push the buckle through
the cover.
Slide the buckle retainer
3
into the buckle slot, and
ensure the red release
button faces out.
Child Seat Function
ADJUSTMENT
SLOT
position.
Turn the buckle webbing
2
and slide it between buckle
positions.
19

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Boulevard 65

Table des Matières