Inserting And Removing The Activation Key; Switching The Lawn Mower On And Off; Checking The Lawn Mower And Battery; Checking The Controls - Stihl RMA 443 C Notice D'emploi

Masquer les pouces Voir aussi pour RMA 443 C:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
English
► Press locking lever (2).
The battery (3) is released.
► Remove battery (3).
► Close flap (1).
10 Inserting and Removing
the Activation Key
10.1
Inserting the Activation Key
► Open flap (1) as far as the stop and hold.
► Insert activation key (2) in key receptacle (3).
► Close flap (1).
10.2
Removing the Activation Key
► Open the flap as far as the stop and hold.
► Pull out the activation key.
► Close the flap.
► Keep the activation key out of the reach of
children.
11 Switching the Lawn Mower
On and Off
11.1
Activating and Deactivating the
Blade
11.1.1
Activating the Blade
► Place the lawn mower on a level surface.
32

10 Inserting and Removing the Activation Key

► Press locking button (1) with the right hand
and hold.
► Pull control bar for mowing (2) with the left
hand fully in the direction of handlebar (3) and
hold so the thumb encloses handlebar (3).
The blade turns.
► Release locking button (1).
► Hold handlebar (3) and control bar for mow‐
ing (2) with the right hand so the thumb enclo‐
ses handlebar (3).
11.1.2
Deactivating the Blade
► Release the control bar for mowing.
► Wait until the blade is no longer turning.
► If the blade continues to turn: pull out the acti‐
vation key, remove the battery and consult a
STIHL specialist dealer.
The lawn mower is defective.
12 Checking the Lawn Mower
and Battery
12.1

Checking the Controls

Locking button and control bar
► Pull out the activation key.
► Remove the battery.
► Press the locking button and release it again.
► Pull the control bar fully in the direction of the
handlebar and release it again.
► If the locking button or the control bar is stiff or
does not spring back into the initial position:
do not use the lawn mower and consult a
STIHL specialist dealer.
The locking button or the control bar is defec‐
tive.
Activating the blade
► Insert the activation key.
► Fit the battery.
► Press the locking button with the right hand
and hold.
► Pull the control bar with the left hand fully in
the direction of the handlebar and hold so that
the thumb encloses the handlebar.
The blade turns.
0478-131-9946-B

Publicité

Table des Matières
loading

Table des Matières