Adjusting The Loop Handle; Inserting And Removing The Battery; Inserting The Battery - Stihl FSA 57 Notice D'emploi

14 Inserting and Removing the Battery

To adjust the length of the drive tube:
► Switch off the trimmer, @ 15.2.
► Remove the battery, @ 14.2.
► Hold the drive tube firmly.
1
2
► Depress and hold the drive tube release button (1).
► Adjust the control handle (2) until it engages in the desired
position.
► Release the drive tube release button.

13.2 Adjusting the Loop Handle

The loop handle can be set in different positions to suit the
height and reach of the operator.
To adjust the position of the loop handle:
► Switch off the trimmer, @ 15.2.
► Remove the battery, @ 14.2.
0458-806-8221-B
2
1
► Loosen the star knob (1).
► Adjust the loop handle (2) to the desired operating
position.
► Tighten the star knob securely.
14 Inserting and Removing the Battery

14.1 Inserting the Battery

WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 6. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 6.
WARNING
To reduce the risk of unintended activation, never store the
battery in the trimmer, @ 20.2.
To insert the battery:
2
1
► Place the trimmer on a level surface.
► Insert the battery (1) into the battery compartment (2) until
you hear an audible click.
In this position, the arrows (3) on the battery are still
visible and the battery is locked in the battery
compartment. There is no electrical contact between the
battery and the trimmer.
3
English
23