Cub Cadet 19A70056100 Mode D'emploi page 11

Operation
Triple Bagger Usage
NOTE: When all grass bags are full, place the
tractor on a firm, level surface, disengage the
PTO, turn the tractor engine off and set the
parking brake.
1. Open the grass catcher hood by pushing
in on the rear, right-side tab with your
right hand, as seen in 1 of Figure 5-1, and
lifting the cover with your left hand in the
center rear of the bagger cover, 2.
Figure 5-1
2. Do not remove the chute tube assembly
from the tractor.
3. Remove the three bag assemblies from
the bag support brackets by lifting the
front edge up first, and then sliding the
back edge forward and up until it is clear
of the frame as shown in Figure 5-2.
Figure 5-2
11
4. Empty the grass clippings at a proper
disposal site, use the handle at the
bottom of each grass bag. Holding the
bag firmly, empty the contents
5. Replace grass bags, close lid, flip down
seat, restart your tractor, release parking
brake and resume cutting your grass.
5