Ii- Door Reversibility - Eurocave V101 Mode D'emploi

5 - I
II - Door reversibility
a - Parts summary
1 - 2: grommets
3:Torx screws 25
4: upper hinge
b - Door reversibility
Your wine cabinet door is reversible. In this way you can change
which way it opens.
• Close the door
• Remove the grommets, (Fig.A).
• Remove the torx screws and the upper hinge.
• Remove the pin with a spanner (Fig. B).
• Carefully remove the plug with a thin blade and in its place fit the
pin and washer (Fig. B).
• Replace the plug on the opposite side (Fig. B).
WARNING: the glazed doors are very heavy. Take all necessary
precautions not to injure yourself or drop the door. Never place it
on its edges, which may break it.
• Position the door onto the pin of the lower hinge. Hold the door
against the door seal.
• Place the pin of the upper hinge in the corresponding slot of the
door.
• Fit the 3 screws. Ensure that the hinge is fixed properly into place,
if not adjust it. (Fig.C).
• Fit the 3 grommets.
• Wait 48 hours before plugging in
8
NSTALLING YOUR WINE CABINET
Fig.A
Fig.B
Fig.C
1
2
3
4