Motorola Solutions XT600d Serie Manuel D'utilisation page 27

2
1 Place the charger on a flat surface.
2 Insert the connector of the Power Supply (1) into the
port on the side of the Drop-in Tray SUC (2).
Send Feedback
1
3 Insert the radio into the charger with the radio facing
the front, as shown.
NOTICE:
When charging a battery attached to a radio, turn
the radio off to ensure a full charge. See
Operational Safety Guidelines on page 15
information.
2.8
Charging a Stand-Alone Battery
To charge only the battery, perform the following steps:
English
for more
27