Boston Scientific LATITUDE Communicator Manuel D'instructions page 8

6. Make sure the green power light on the Communicator is on. This indicates the
Communicator is connected to power. If the green light is not on, check that both
ends of the power supply cord are plugged in firmly.
7. The installation of your Communicator is now complete. Setup instructions for the
Communicator should appear on the display.
Make sure to use the correct power supply that came with your Communicator
Notes:
or MultiConnect Converter.
Your Communicator and MultiConnect Converter should remain connected to their
respective power outlets.
A telephone connected to the telephone jack labeled
Communicator will not provide telephone service when the Communicator is
connected to the MultiConnect Converter.
For assistance and support in the US and Canada, contact 1-866-484-3268. In
Europe, contact your healthcare provider.
®
Communicator Patient Manual Supplement
4 | LATITUDE
on the back of your