Goobay TV EasyMount Ultraslim L Mode D'emploi page 22

User's Manual
1. Before drilling, attend to live cables or other lines lying behind plaster, and
do not damage them.
Fig. 13: Removing cover 1
Fig. 14: Removing cover 2
1
Fig. 15: Marking the drilling holes
6. Drill the holes with a 10mm concrete drill 60mm deep.
Fig. 16: Mounting the wall mount
Fig. 17: Installing direction
22
2
3
2. R emove the cover of the wall
mount (B) by pushing the 2
lower plastic clips outwards.
3 . R emove towards oblique top.
4. U se the integrated spirit level
to adjust the wall mount (B).
When the steel ball has settled just
below the triangle, the wall mount (B)
is aligned horizontally.
5. M ark the drilling holes 1, 2 and
3 with a pencil.
7. Plug a concrete anchor (W-B)
in each drilling hole.
8. Mount the wall mount (B) by
using the wall screws (W-A).
Mind the arrow pointing upwards.