Preparation Of The Unit; Cabin Roof Preparation - SNDC ECOCLIM SKIMO Notice De Montage

Remove the 4 unit fastening screws circled in blue.
Do not unscrew the 4 screws at the back of the unit.
Protective glasses
Protective gloves
SNDC – 274 chemin des Agriès 31860 Labarthe-sur-Lèze – France
Tél : +33 (0)5 34 480 480 - Mail :

Preparation of the unit

Caution

Cabin roof preparation

1. Place the template on the roof. (See cut-out drawing below and template in appendix)
2. Cut out and drill the roof following the template
– www.sndc.net
sndc@sndc.fr
EN
Dimensions in millimetres (mm) :
•
The cut-out is 227mm long by 262 mm wide with 4 Ø10 mm
holes for the fastening screws.
•
The required foot-print inside the cabin to install the cabin
panel is represented by the dimensions 293 x 387 mm.
p.24