Introduction; Electrical Protections; Technical Characteristics - SNDC ECOCLIM SKIMO Notice De Montage

The unit described in this manual, called unit, SKIMO unit, A/C unit, SKIMO A/C unit or SKIMO, is designed to be installed on the
roof of agricultural, construction works, road works, or industrial vehicles, machines or vans. The SKIMO unit air-conditions the cabin
of the machine or vehicle. The SKIMO A/C unit is a monobloc unit pre-charged with R134a refrigerant gas and containing all the
parts of the A/C circuit. It only needs to be connected electrically to the machine or vehicle. (See electrical requirements).
Device SKIMO 12V
10,5V
Under pressure Below these values, security will automatically shut down
the system.
18V
Overvoltage Beyond these values, security will automatically shut down
the system.
In the event of overheating of the engine, a system shutdown will occur and restarting will be allowed only at
Overheated
the return of a normal temperature.
Overconsumption An abnormal consumption of an air conditioner in the SKIMO range will result in automatic safety.
Overpressure or Air conditioners in the SKIMO range are equipped with a pressure switch that protects the system in case of
under load overload or abnormally high refrigeration pressure or lack of refrigerant.
Compressor The compressor is equipped with a safety valve that protects the system in the event of pressure switch
safety failure.
Air conditioners in the SKIMO range are equipped with a safety device that turns off the air conditioner when
Machine safety
the lid is opened.
The technical specifications or features of the SKIMO air conditioner, as described or illustrated, are subject to change without notice.
SKIMO is a monobloc air conditioner with all the elements integrated:
•
air conditioning components (condenser, evaporator, receiver dryer filter, compressor),
•
electrical components (fan motor, internal harness, internal fuse),
•
the user interface with the control panel and the louvers.
Characteristics
Mass
Cooling capacity
Maximum consumption
Refrigerant charge
Oil
With its CE marking, SKIMO meets the essential health and safety requirements in accordance with Directives 2006/42 / EC, 2014/30/
EC and 2014/35 / EC. See statement in annex.
The SKIMO unit can be mounted on antivibration pads to limit vibrations and noise. In this case, there must be a sufficient
number of pads, they are distributed so as to provide stable support for the unit, the instructions with respect to the
overhang and all other instructions are respected, and that the waterproofing between the roof and the SKIMO unit is
carried out.
SNDC – 274 chemin des Agriès 31860 Labarthe-sur-Lèze – France
Tél : +33 (0)5 34 480 480 - Mail :

Introduction

Electrical protections

SKIMO 24V
80V/ 12V & 80V / 24V
20V
32V

Technical characteristics

12V 24V
2.9 KW for an air inlet at +31 ° C and 50% humidity
80 A 40 A
PAG SP10 ISO 46 (reference in annex)
– www.sndc.net
sndc@sndc.fr
EN
SKIMO SKIMO Plus
24V
71V
20V
100V
32V
24V plus
48V
30 kg (±3 kg)
80A
30 A
HFC R134a (±10 g) : 480 g
SKIMO Plus
48V/ 12V & 48V / 24V
36V
62V
80V
14 A
p.21