Safety Instructions - SNDC ECOCLIM SKIMO Notice De Montage

List of pictograms used in this manual or on the SKIMO unit
Read and understand the manuel
Important information
•
Installation or maintenance of the air conditioner must be performed by a qualified and qualified technician.
•
Be careful the unit is heavy. Do not handle or install the air conditioner alone.
•
Do not store, install, or use the air conditioner near flammable liquids or gases, heat sources, or fire or explosion
hazards.
•
If the air conditioner shows visible damage, it must not be operated.
•
In case of fire, do not open the top cover of the SKIMO unit and use suitable extinguishing means. Do not use water
for extinction.
•
Please inform the manufacturer of your vehicle if you need to change the vehicle height indication in the vehicle
papers when you install the SKIMO unit on the roof (height of 250 mm).
•
Disconnect power to the machine or vehicle ignition before servicing the air conditioner.
•
Disconnect all connections to the power supply before performing any repair work on the air conditioner.
•
Do not introduce foreign objects into the SKIMO unit.
•
Never deactivate the safety devices. Always turn off the unit and engine of the vehicle or machine before opening
the hood or disassembling the console from the control panel.
•
Do not make cuts on cabs of vehicles certified "FOPS-ROPS".
•
The air conditioner must be regularly cleaned and cleaned of dust, plant waste, other waste and combustible objects
to avoid the risk of fire.
•
For safety reasons, only use original spare parts.
•
The A/C refrigerant circuit is under pressure. Do not open the A/C refrigerant circuit. This would create a loss of
refrigerant gas that is colourless and odourless. It could create serous burns. The personal performing the repair or
maintenance of the A/C refrigerant circuit must be qualified to manipulate such systems and must use appropriate
tools, equipment and protection equipment. Wear protection goggles and gloves when you maintain the SKIMO unit.
Rejecting refrigerant gas in the atmosphere is strictly forbidden.
•
With an 80V power supply, use an H07-KV or VR type electric cable.
•
Any modification or incorrect installation and use of the SKIMO unit, strictly prohibited, can be dangerous and may
result in injury or property damage. SNDC disclaims any liability for damage caused by improper installation or use
other than that described in the SKIMO kit manual.
•
SNDC disclaims all liability for damage caused by installation or use not in accordance with the instructions 810F01.
SNDC – 274 chemin des Agriès 31860 Labarthe-sur-Lèze – France
Tél : +33 (0)5 34 480 480 - Mail :
EN

Safety instructions

General danger
Physical danger
Danger
– www.sndc.net
sndc@sndc.fr
Eye protection
Protective gloves
p.20