Arcam HDA Serie Manuel page 23

PA410
All specification values are typical unless otherwise
stated. Arcam has a policy of continuous improvement
for its products. This means that designs and
specifications are subject to change without notice.
E&OE.
Continuous power output at at 0.2% THD, per channel
Four channels driven, 4Ω / 8Ω, 1kHz
Two channels driven, 4Ω / 8Ω, 1kHz
Harmonic distortion, 80% power, 8Ω at 1kHz
Inputs
Input sensitivity 50W / 8Ω
Signal/Noise ratio (A-wtd) 50W / 8Ω
Input impedance
Frequency response
General
Mains voltage
Maximum power consumption
Low power standby consumption
Network standby consumption
Dimensions W x H x D (including feet,
control knob and speaker terminals)
Weight (net)
Weight (gross)
70W / 50W
90W / 60W
0.003%
560mV RMS
106dB
10kΩ
20 - 20kHz +/-0.2dB
110–120V or 220–240V, 50–60Hz
700W
0.5W
2W
433x325x105mm
10kg
11.5kg
EN-21
EN