Arcam HDA Serie Manuel page 22

PA240
All specification values are typical unless otherwise
stated. Arcam has a policy of continuous improvement
for its products. This means that designs and
specifications are subject to change without notice.
E&OE.
Continuous power output at 0.2% THD per channel
Two channels driven, 4Ω / 8Ω, 1kHz
One channel driven,
8Ω bridged mode, 1kHz
Harmonic distortion, 80% power, 8Ω at 1kHz
Inputs
Input sensitivity 200W / 8Ω
Signal/Noise ratio (A-wtd) 10W / 8Ω
Input impedance
Frequency response
General
Mains voltage
Maximum power consumption
Low power standby consumption
Network standby consumption
Dimensions W x H x D (including feet,
control knob and speaker terminals)
Weight (net)
Weight (gross)
380W / 225W
790W
0.001%
RCA Type XLR Type
31dB 25dB 31dB
1.15V RMS 2.3V RMS 2.3V RMS
110dB 114dB 110dB
10kΩ
20 - 20kHz +/-0.05dB
110–120V or 220–240V, 50–60Hz
1.5kW
0.5W
2W
433 x 425 x 177mm
18kg
19.7kg
EN-20
25dB
4.6V RMS
114dB