Expanding The Cart For Use; Important; Installing The Lid Handle - Pit Boss PB260PSP2 Guide De Montage

4. EXPANDING THE CART FOR USE

Installation:
• Anchor the Grill and Cart by placing your foot on the cart foot pedal.
Next, carefully lift the Side Shelf Handle to expand the grill into a patio
position. Note 4A.
• Once the Cart is fully expanded, position the cart legs under the right
support of the Grill Body brace. Note 4B.
• To lock the Cart for use, swing the locking plate onto the locking pin of
the cart leg. Note 4C.
IMPORTANT: Re-tighten the screws on the legs of the Cart to ensure
they are completely secure after expanding the grill for the first time.

5. INSTALLING THE LID HANDLE

Parts Required:
2 x Lid Handle Bezel (#8)
1 x Lid Handle (#9)
Installation:
• Remove the pre-installed screws from the Lid Handle. From inside
the barrel lid, insert one screw to protrude to the outside. Add a
Lid Handle Bezel on the screw, then hand-tighten the screw (from
the inside) into the Lid Handle. Repeat the same installation for the
other end of Lid Handle.
7
4A
4B
4C
5
9
8
8