Hillrom Ultrafins Stirrups Instructions D'utilisation page 17

INSTRUCTIONS FOR USE
3.3 Device controls and indicators:
3.4 Storage, Handling and Removal Instructions:
3.4.1 Storage and Handling:
The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2 Removal Instruction:
a. Loosen boot-clamping mechanism slide boot along rod until top end (calf
portion) of boot is approximately at patient's mid-calf. Tighten clamp.
b. Ensure patient's heels are securely Removed in the heels of the boots.
c. Use both hands to support and adjust boot to desired position. loosen clamping
mechanism securely.
d. Open boot pad and Remove an Allen Safety Drape over each leg to permit
continuous monitoring of leg position during procedure.
Document Number: 80028130
Version: B
This symbol, located on the sturrup boot mount, represent
the patient's right foot
This symbol, located on the sturrup boot mount, represent
the patient's right foot
This Scale represents Lithotomy angle (For
Reference only).
Page 17
Issue Date: 06 MAR 2020
Ref Blank Template: Ver. F