Publicité
Les langues disponibles
Les langues disponibles
INSTALL HOOD (CONTINUED)
BECAUSE OF THE WEIGHT OF THE HOOD - MAKE SURE THAT
THE OUTER MOUNTING SCREWS ARE DRIVEN INTO THE SOF-
FIT FRAMING AND NOT JUST THE DRYWALL.
3. Plug the rough-in plate power cord and the blower power cord into
the light panel as shown.
4. Set aluminum filters in place on the front and rear ledges, as shown.
5. Install two (2) heat lamp bulbs. Use BR40 size, 250W Max., Infra-
red bulbs only. (Purchase separately)
6. Install three (3) halogen light bulbs. Use PAR20, 50 Watt size.
(Purchase separately)
7. Turn on power and check operation.
NOTE
10
Publicité
