Operation - CombiSteel 7455.17 Serie Mode D'emploi

OPERATION

Storing food
To get the best results from your appliance, follow these instructions:
1. Only store foodstuffs in the appliance when it has reached the correct operating temperature.
2. Do not place uncovered hot food or liquid inside the appliance.
3. Wrap or cover food where possible.
4. Do not obstruct the fan inside the appliance.
5. Avoid opening the doors for prolonged periods of time.
6. The food must be put into container before placed into cabinet or on the shelf. Food must not be placed
into food cabinet directly.
Turn on
1. Close the door of the appliance.
2. Ensure the power switch is set to [O] then connect to the power outlet.
3. Switch on the Power [I]. The current temperature within the appliance is displayed.
4. The on the control panel will flash to indicate a delay to compressor start.
Temperature setting and control
The front panel of the thermostat display:
1. Defrost indicator
2. Compressor operation indicator
3. SET key
4. Temperature modification keys
5. Defrost button
How the see the set point
5. Push and immediately release the SET key, the set point will be showed.
6. Push and immediately release the SET key or wait about 15s to return to normal visualisation.
How to change the set point
• Push the SET key for more than 2 seconds to change the set point value;
• The value of the set point will be displayed and the "°C" starts blinking;
• To change the set value push the „ʌ" (up) or "˅" (down) arrows within 15s.
• To memorise the new set point value push the SET key again or wait 15s.
Automatic defrost
The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual defrost
1. Press and hold the DEFROST
2. The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
button for 5 seconds.
7