Troubleshooting; Faults Table - Atag HG62 B Serie Manuel D'utilisation

TROUBLESHOOTING

Faults table

FAULT
Smell of gas in the vicinity of
the appliance.
Burner does not ignite.
EN 20
If the appliance does not work properly, this does not always mean
that it is defective. Try to find a solution first by checking the points
mentioned in the table below, or contact the service department.
(See the guarantee certificate for details.)
CAUSE
The gas connection of the gas
hob is leaking.
Plug not in socket.
Fuse defective/fuse in meter
cabinet switched off.
Spark plug dirty/damp.
Burner parts not correctly
installed.
Burner parts dirty/damp.
Main gas tap closed.
Fault in the gas network.
Gas bottle or tank is empty.
Wrong type of gas used
(if bottled gas is used).
SOLUTION
Turn off the gas mains.
Contact your gas fitter.
Push the plug into the socket.
Fit a new fuse or switch the
automatic fuse back on.
Clean and dry the spark plug.
Assemble the burner parts
using the centring ridges.
Clean and dry the burner
parts, making sure that the
outflow holes are open.
Open the main gas tap.
Check with your gas supplier.
Connect a new gas bottle or
have the tank filled.
Check that the gas used is
suitable for the appliance.