Status Codes; Table - Atag HG62 B Serie Manuel D'utilisation

STATUS CODES

Table

SYMPTOM
LEDs in the button aren't
shining.
Green LED in the button
is shining continuous.
Green LED in the button
is blinking.
Green and red LED in the
button are blinking after each
other.
Red LED in the button is
blinking.
Red LED in the button is
shining continuous.
On/Off button
The On/Off button on the HG....C appliances can indicate a number of
functions and faults.
STATUS
The appliance is switched off.
The appliance is turned on.
Child lock.
A fault occurred by reigniting
a burner.
Your gas hob has become
too hot.
A fault occurred in the
electronics of your gas hob.
SOLUTION
-
-
Hold the on/off button
pressed in for 5 seconds,
and you can use the gas hob
again.
Check the gas supply to
your gas hob and/wether the
burner parts are positioned in
the right way.
Turn every button to the
0-setting and try to ignite the
burner again.
Let your gas hob cool down
and you can use it again.
Contact your service centre.
EN 19